ESL ELV Steering Lock Emulator for Jeep and Dodge

Steering Column Lock Problem Fix

The Emulator is an easy fix to a very common issue with Steering Column Lock. It works by replacing original ESL signal. When the steering lock malfunctions, and its stuck in lock position, it is required to physically remove it from the vehicle. The emulator will simulate the electronic signal of the steering lock, enabling the car to start.

The emulator includes both RED and GREEN LED Lights as indicators of correct functioning with lock sound.

Plug & Play - No additional programming required.

Compatible Vehicles:

Jeep Grand Cherokee 2011-2013

Dodge Challenger 2012

Compatible with steering lock number below:

05026788AC

05026788AA

5026788AD

05026788AB

03352410103

What is ELV / ESL?

An ESL an electronic steering lock which is powered by a motor. At times, it malfunctions and this emulator provides a solution to this.

If you are facing any of the problems mentioned below then it means your ELV / ESL is malfunctioning:

• - Car won’t start.

• - Dashboard lights wont turn on

• - Steering wheel can’t be unlocked

• - Auto parts won't respond when the ignition is switched on

• - Unable to turn the key in the ignition

• - The steering remains locked with the key in the ignition 

• - The ignition key turns, but no lights on the dash

• - The steering Lock is OFF with no key in the ignition

Jeep Grand Cherokee Steering Lock Emulator Installation:

1. Unplug the ELV wire from the vehicle steering lock unit.
2. If vehicle steering lock is in lock mode, steering lock must be removed.
3. Connect emulator to the car and start the car.