1 8

Boot Lid Tailgate Opening Switch Button Nissan Micra K12 2002-2010 25380-AX60B

Boot Lid Tailgate Opening Switch Button Nissan Micra K12 2002-2010 25380-AX60B

£17.99 GBP
£17.99 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.
Is your Nissan Micra boot stuck or refusing to open? A failing, oxidized micro-switch is a highly common fault on MK3 K12 models. This brand-new aftermarket replacement tailgate release button restores smooth, responsive, one-touch operation to your trunk lid.
Engineered strictly to original manufacturer specifications, it features durable ABS housing, weather-sealed internal contacts, and a direct plug-and-play design that requires zero vehicle modification.
🔍 Item Specifications
  • Condition: Brand New (Premium Aftermarket Replacement)
  • Part Number: 25380-AX60B / 25380AX60B
  • Interchange Part Numbers: 25380-AX600, 25380-AX60A, 25380-AX610
  • Placement on Vehicle: Rear / Tailgate
  • Connector Pins: 2-Pin Plug Configuration
  • Material: Heavy-duty ABS Plastic & Copper
  • Colour: Black

🚗 Vehicle Compatibility

This part is a direct replacement for the Nissan Micra MK3 (K12 / K12E) hatchback models manufactured between 2002 and 2010.
  • Compatible Engines: Fits all 1.0L, 1.2L, 1.4L, 1.6L petrol, and 1.5L dCi diesel variants.
  • Note: This switch is designed for standard key systems and is not suitable for models equipped with the Intelligent/Keyless Smart Key.

✨ Key Features

  • Direct Fitment: Matches the precise shape, length, and click-response of the factory part.
  • Weather-Resistant Seal: Upgraded internal contacts prevent moisture and salt corrosion—the primary cause of the original switch failure.
  • Easy Installation: 2-pin socket configuration allows you to clip out the old faulty mechanism and plug in the new unit seamlessly.

🛠️ Step-by-Step Installation Guide

Replacing this switch is a simple DIY job that takes roughly 15 to 20 minutes. No complex programming or wiring is required.
Tools You Will Need: 10mm socket/spanner, flat-head screwdriver or plastic trim tool.
  1. Access the Interior Trim: Open your boot. Remove the plastic clips holding the inner carpet/plastic tailgate lining in place and gently pry the panel away.
  2. Remove the Exterior Trim: From inside the tailgate, look through the access holes to find and remove the four 10mm nuts holding the exterior chrome trim panel.
  3. Disconnect the Old Switch: Locate the wiring loom, squeeze the release tab on the 2-pin electrical plug, and pull it apart.
  4. Swap the Switches: Unhook the old, faulty switch from the exterior trim. Clean away any dirt or moisture from the mounting area. Snap your new 25380-AX60B switch securely into place.
  5. Test Before Reassembly: Plug the 2-pin connector into your new switch. Click the button to test the latch functions perfectly before bolting everything back together.
  6. Reassemble: Re-bolt the exterior trim panel and push the inner tailgate liner clips back into place.

🔧 Troubleshooting Tip for Buyers

If you install the new switch and the boot still does not open or click, the underlying issue is likely a blown central locking fuse or a broken wire inside the rubber boot gaiter (the flexible rubber tube that routes cables from the car body into the tailgate lid). Constant opening and closing can snap these wires over time. Check these two common failure points to resolve the issue.

🚚 Shipping & Returns Info

  • Fast & Free Delivery: Sent via Royal Mail Tracked 24 at no extra cost to you.
  • Same-Day Dispatch: Order before 3:00 PM (Monday to Friday) for immediate dispatch.
  • Risk-Free Buying: We offer a generous 60-day return policy if you change your mind or buy by mistake.

📦 Package Includes

  • 1 x Brand New Tailgate Boot Opening Switch (Part No: 25380-AX60B)

💡 Buyer's Note

Please verify your old part number or check your vehicle’s compatibility against the codes listed above before purchasing to guarantee a perfect fit.
View full details